Menu
Your Cart

Kenika MPPT Solar Controller SCE-1224-50A

Kenika MPPT Solar Controller SCE-1224-50A
Free
Kenika MPPT Solar Controller SCE-1224-50A
  • Stock: In Stock
  • Model: SCE-1224-50A
  • Weight: 3.00kg
  • Dimensions: 29.50cm x 19.50cm x 11.50cm
190 samples sold
Product Views: 1176

Solar Controller: Peralatan elektronik yang digunakan untuk mengatur arus searah yang diisi ke baterai & diambil dari baterai ke beban. Tanpa solar controller, baterai akan rusak oleh overcharging & ketidakstabilan tegangan.

Solar controller Kenika ini menggunakan tipe MPPT. Yang mempunyai banyak keunggulan daripada tipe PWM antara lain:

  1. Mampu memaksimalkan faktor pengisian kapasitas secara lebih besar.
  2. Mampu mendeteksi daya yang diproduksi solar panel walaupun kecil sehingga dapat melakukan pengisian kapasitas baterai yang dengan lebih cepat.
  3. Tegangan input yang tinggi untuk mencharge baterai baik 12V sampai dengan 24V, sehingga efesiensinya lebih baik.
  4. Controller yang canggih Maksimum Power Point Tracking teknologi (MPPT) dengan penggunaan efisiensi lebih dari: 99.5%
  5. LCD desain panel layar, yang dinamis sehingga menampilkan data operasi alat & kondisi kerja antara lain: tipe sistem tegangan Panel Photovoltaic (PV), Tegangan pengisian Voltage Max:150 Vdc, Mengisi arus, Mengisi daya, Temperatur dll.


Specifications:

Model SCE-1224-50A
MPPT Controller 50A
Wiser2-12V/24V series
Charege Mode MPPT (Maximum Power Point Tracking)
Charege Metode Three stages: constant current (MPPT), constant voltage, floating charge
System Type DC 12V/24V Automatic Recognition
System Voltage 12V system DC 9V - DC 17V
24V system DC 18V - DC 34V
MPPT efficiency ≥ 99.5%
Input Characteristics
Max. PV input voltage 12V/24V system DC 150V
Start the charge voltage point 12V/24V system Higher than current baterry voltage 3V
Low input voltage protection point 12V/24V system Higher than current baterry voltage 1V
Over voltage protection point 12V/24V system DC 150V
High voltage recovery point 12V/24V system DC 145V
Rated PV power 12V system 650W
24V system 1300W
Charge Characteristics
Selectable Battery Types (Default Gel Battery) 12V/24V system Flooded,Sealedlead acid, Gel battery (Other types of the batteries also can be defined)
Constant Voltage 12V/24V system Please check the charge voltage according to the  battery type form
Floating Voltage 12V/24V system
Rated charge current 12V/24V system 50A
Temperatur factor 12V/24V system ±0.02% / °C
Temperatur Compensation 12V/24V system ‒3mV / °C / 2V (default)
Output Voltage Stability Precision 12V/24Vsystem ≤ ± 1.5%
Output Discharge Characteristics
USB (Total for 2 USB output) DC 5V 3A
Load output voltage Based on battery voltage
Low voltage output Protection Default 10.5V,Recovery 11V, It can be adjustable
Rated output current 50A
The ouput control On mode, Off mode, PV voltage control mode, Dual time control mode,PV&Time control mode
Output control set mode Controller button or PC software
Display
LCD display System type, PV voltage, Charge voltage, Charge current, Charge power, temperatur etc.
PC software RS485
PC system for solareagle Windows 7, 8, 10
Protection
Low voltage input protection Yes
Over voltage input protection Yes
Over Charge power protection Yes
Low voltage output Protection Yes
Rated output current protection Yes
Temperature protection Yes
PV and Battery reverse connection protection Yes
Other Parameters
Noise ≤ 40dB
Thermal heat - dissipating method Air cooling
Certification CE, FCC, RoHS
Physical
Measurement D×W×H (mm) 243×155×79
Box Dimension (cm) 29.5×19.5×11.5
Nett Weight (kg) 1.8
Gross Weight (kg) 2.5

Write a review

Note: HTML is not translated!
Bad Good
Notification Module
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.