Your Cart

Paket Kenika Solar Home Basic 1000W PA-BAS1K

Paket Kenika Solar Home Basic 1000W PA-BAS1K
Paket Kenika Solar Home Basic 1000W PA-BAS1K
  • Stock: In Stock
  • Model: PA-BAS1K
  • Weight: 0.00kg
  • Dimensions: 0.00cm x 0.00cm x 0.00cm
190 samples sold
Product Views: 4109

Paket Solar Home Basic 1000W PA-BAS1K terdiri dari:
• 1 pc Kenika Power Inverter KCT-1K12 1000W 12V
• 1 pc Solar Charge Controller POWMR MPPT-60A
• 3 pcs Kenika Panel Surya Monocrystalline 22V 200WP NMS200W


KCT-1K12 Specifications:

Continuous Power 1000W
Peak Power 3000W
Battery Type Lead Acid Battery
Input Voltage DC 12V
Charging Current 1-20A Adjustable
Output Voltage AC 220V
Output Frequency 50Hz ± 2.5Hz
Waveform Pure Sine Wave (Low Frequency)
Transfer Time 4ms
USB Output N/A
Efficiency 81% (Battery), 93% (AC Grid)
Method LCD+LED
Content Input/Output Voltage, Battery Voltage, Battery Capacity, Load Capacity, Working Mode, Frequency
Input Protection Low-Voltage; Low-Voltage Power Off; Battery Reverse Polarity Protection
Output Protection Overheating Protection; Overload Protection; Output Short Circuit Protection; etc.
Protection Low Voltage, Over Voltage, Overload, Over Temperature, and Short Circuit Protection
Output Short Circuit AC Mode: Jump Fuse inverter Mode: Shut Down
Overload If Overload 105%, Inverter will alarm. If Overload 130%, Inverter will shut down in 10s. Once the inverter is off; It must be turned on manually
High AC Voltage Turn Off AC, Turn to Inverter Mode Automatically
Low AC Voltage Inverter will shut down automatically, Once the AC recover, Inverter will turn on and charge automatically
Over Temperature Inverter will alarm and turn off output but it will recover to normal state after colling down
Working Temperature Ambient Temperature 0°C ~ +40°C@100% Load
Working Humidity 30% ~ 90% RH, Non-Condensing
Operating Temperature Range -10°C to +50°C
Storage Temperature Range -30°C to +70°C
Vibration Resistance 10 ~ 500Hz 2 G 10 Min./Cycle - X - Y – Z 60 Min. Per Each Axis
Cooling Method AC Load Adjustment and Fan Cooling by Internal Thermostat
Cooling Mode Intelligent Temperature Controlled Air Cooling
Overheat Protection 70°C±5°C
Shell Material Aluminium
Product Size 455×235×155 mm
Package Size 550×295×200 mm
Weight 14 kg
Gross Weight 15.5 kg

MPPT-60A Specifications:

Charing Mode 3-Stage: Constant Current (MPPT), Constant Voltage, Floating
Max. PV Input Power • 12V: 720W
• 24V: 1440W
• 36V: 2100W
• 48V: 2800W
Input Voltage • 12V: 20V ~ 80V
• 24V: 37V ~ 105V
• 36V: 50V ~ 160V
• 48V: 72V ~ 160V
Battery Voltage AutomaticRecognition (12V Battery) DC9V - DC15V
Battery Voltage AutomaticRecognition (24V Battery) DC18V - DC29V
Battery Voltage AutomaticRecognition (36V Battery) DC30V - DC39V
Battery Voltage AutomaticRecognition (48V Battery) DC40V - DC60V
Overcharging Protection Voltage 60V
Limited Current Protection 61A
Max. Efficiency ≥98.1%
PV. Utilization ≥99%
Temperature Protection 75°C
Fan-on Temperature >45°C
Fan-off Temperature <40°C
Product Dimension 214 × 115 × 50 mm
Box Dimension 252 × 202 × 72 mm
Nett Weight 1.1 kg
Gross Weight 1.2 kg
Electromagnetic Compatibility Accord to EN61000, EN55022, EN55024
Enclosure IP21
Environmental Temperature -20°C ~ +55°C
Storage Temperature -40°C ~ +75°C

NMS200W Specifications:

Power 200W
Module Efficiency 19.87%
Voltage at Pmax (Vmp) 22V
Current at Pmax (Imp) 9.09A
Open Circuit Voltage (Voc) 26.67V
Short Circuit Current (Isc) 9.36A
Power Tolerance ±3%
Solar Cell (Type/Size) Mono (210mm)
Solar Cells Number 42Pcs (3×14)
Dimension 1535×670×30 mm
Product Weight 10.3kg
Tempered Glass 3.2mm High Permeability Coated
Frame Anodized Aluminium Alloy
Junction Box IP67, 3*Bypass diode
Cable 4.0mm², (+)1000mm / (-)1000mm
Connector Original MC4/Compatible MC4
Mechanical Load Front 5400PA/Basic 2400PA
Package Weight 11.5kg

Write a review

Note: HTML is not translated!
Bad Good
Notification Module
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.